Alignex Blog

Introduction to SOLIDWORKS Simulation - Meshing

Sean Stiehm on November 21, 2019 at 11:30 AM

1 comments

Welcome to part 5 of our Introduction to SOLIDWORKS Simulation series. This time we will be showing you how to break your model into smaller entities, otherwise known as meshing. 

Read More...

Introduction to SOLIDWORKS Simulation - Fixtures and Loads

Sean Stiehm on November 14, 2019 at 11:30 AM

0 comments

Welcome to part 4 of our Introduction to SOLIDWORKS Simulation series. This time we will be walking you through the process of assigning fixtures and loads to your simulation study.

Read More...

Introduction to SOLIDWORKS Simulation - Assigning Materials

Sean Stiehm on November 7, 2019 at 11:30 AM

1 comments

Welcome to part 3 of our Introduction to SOLIDWORKS Simulation series. This time we will be walking you through the process of creating your study and assigning materials.

Read More...

Introduction to SOLIDWORKS Simulation - Prepping Your Geometry

Sean Stiehm on October 31, 2019 at 11:30 AM

0 comments

Welcome to part 2 of our Introduction to SOLIDWORKS Simulation Series. This time we will be walking you through the first step needed before completing any simulation, prepping your geometry.

Read More...

Introduction to SOLIDWORKS Simulation - Finite Element Analysis

Sean Stiehm on October 24, 2019 at 11:30 AM

3 comments

Have you ever been interested in SOLIDWORKS Simulation but didn't know where to start? With such a wide variety of design analysis solutions, Simulation can be an intimidating product for someone newer to the SOLIDWORKS suite of products.

Read More...

Chamfering Non-Planer Edges in SOLIDWORKS CAM and CAMWorks

John Marks on May 16, 2019 at 11:30 AM

0 comments

Have you ever needed to add an edge break to a Boss, Hole or Pocket feature with curvature on the top edge of the surface? I can't tell you how many times I talk to customers struggling to do those very things, unaware that the functionality is only a few clicks away. 

In this video, we will walk through setting up the Chamfering of Non-Planer Edges inside SolidWorks CAM or CAMWorks 2.5 axis milling.

Read More...

10 Best Practices for Large Assembly Design

Travis Quick on February 11, 2019 at 11:30 AM

2 comments

There is NO EASY BUTTON when it comes to working with complicated assemblies. Only a combination of small fixes and best practices can lead to better performance. If you experience long open times, graphics lags or issues working with mates, it may be time to review your process. 

Read More...

How to Extract Raw Curve Data from an Image File

Eric Weber on June 28, 2018 at 11:30 AM

0 comments

Have you ever wanted to be able to import information from an image file but didn't have the original data?  Well we've got you covered. Join Alignex engineer Eric Weber as he walks you through the process of creating X/Y plots on any picture you can find. 

Read More...

6 SOLIDWORKS Composer Features You Need to Learn

The Alignex Team on January 4, 2018 at 11:30 AM

0 comments

You’re already convinced that SOLIDWORKS Composer streamlines your production process. Next you need to learn the key features that will use your existing 3D CAD data to make high quality illustrations, photorealistic images, BOMs and interactive animations. Check out these six short video tutorials and see how to use the most popular features in SOLIDWORKS Composer.

Read More...

Save Time with DriveWorks Quick Tips

The Alignex Team on October 26, 2017 at 11:30 AM

0 comments

Check out our new library of Design Automation and Product Configuration videos! Each video is 90 seconds or less so you can get up to speed quickly, or pause after each step to learn at your own pace. These 12 Quick Tips videos cover topics from custom properties and form templates to advanced feature parameters and specification test mode.

Read More...

0 comments

Leave a comment